ASTM A403 WP304L STAINLESS STEEL SPECIAL TEE
Product Information
An ASTM A403 WP304L stainless steel special tee refers to a specialized type of tee fitting made from stainless steel grade 304L and conforming to the ASTM A403 standard.The ASTM A403 specification covers the requirements for wrought austenitic stainless steel fittings for pressure piping applications. This standard ensures that the special tee meets specific quality and performance standards.
| Product Name | ASTM A182 F304 ASME B16.11 High Pressure Stainless Steel Forged Threaded (THD) Straight Tee |
| Size Range | 1/8” to 4” |
| Pressure Class | Class 2000 3000 6000 |
| Standards | ASTM A182 |
| Type | Threaded (THD) Straight Tee |
| Dimensions | ASME B16.11 |
Tee Design: The special tee has a T-shaped design with one inlet and two outlets. The inlet is connected to the main pipeline, while the outlets provide branches perpendicular to the main line at a 90-degree angle.
ASTM A182 F304 Mechanical Properties
| Grade | Tensile Strength, min (MPa) | Yield Strength, min (MPa) | Elongation in 2inches, min (%) | Reduction of Area, min (%) | Hardness (HBW) |
| F304 | 515 | 205 | 30 | 50 | ﹍ |
ASME B16.11 forged tee is a three-way fitting used to make perpendicular connections to the pipe. The three outlets of the forged tee may be furnished with either socket welding (SW) end or threaded (THD) end. The forged tees can be further classified as straight type (all three outlets are the same pipe size) or reducing type (branch outlet is a smaller pipe size). ASME B16.11 SW tees are available in pressure rating Class 3000, 6000, and 9000; ASME B16.11 THD tees are available in pressure rating Class 2000, 3000, and 6000.
Standards & Materials: ASTM A182 F304
ASTM A182 F304 is a forging material specification for 304 grade stainless steel and is used for manufacturing bare forgings or gorged and machined products for applications involving high temperature service.
ASTM A182 F304 Chemical Composition (%)
| Grade | C, max | Mn, max | P, max | S, max | Si, max | Ni | Cr | N |
| F304 | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 8.0~11.0 | 18.0~20.0· | 0.10
|
ASME B16.11 Dimensions of Forged Straight Tee with Threaded (THD) Ends
ASME B16.11 forged tee with threaded ends
| NPS | A
2000# | A
3000# | A
6000# | H
2000# | H
3000# | H
6000# |
| 1/8" | 21 | 21 | 25 | 22 | 22 | 25 |
| 1/4" | 21 | 25 | 28 | 22 | 25 | 33 |
| 3/8" | 25 | 28 | 33 | 25 | 33 | 38 |
| 1/2" | 28 | 33 | 38 | 33 | 38 | 46 |
| 3/4" | 33 | 38 | 44 | 38 | 46 | 56 |
| 1" | 38 | 44 | 51 | 46 | 56 | 62 |
| 1-1/4" | 44 | 51 | 60 | 56 | 62 | 75 |
| 1-1/2" | 51 | 60 | 64 | 62 | 75 | 84 |
| 2" | 60 | 64 | 83 | 75 | 84 | 102 |
| 2-1/2" | 76 | 83 | 95 | 92 | 102 | 121 |
| 3" | 86 | 95 | 106 | 109 | 121 | 146 |
| 4" | 106 | 114 | 114 | 146 | 152 | 152 |
| NPS | G
2000# | G
3000# | G
6000# | B | L2 |
| 1/8" | 3.18 | 3.18 | 6.35 | 6.4 | 6.7 |
| 1/4" | 3.18 | 3.30 | 6.60 | 8.1 | 10.2 |
| 3/8" | 3.18 | 3.51 | 6.98 | 9.1 | 10.4 |
| 1/2" | 3.18 | 4.09 | 8.15 | 10.9 | 13.6 |
| 3/4" | 3.18 | 4.32 | 8.53 | 12.7 | 13.9 |
| 1" | 3.68 | 4.98 | 9.93 | 14.7 | 17.3 |
| 1-1/4" | 3.89 | 5.28 | 10.59 | 17.0 | 18.0 |
| 1-1/2" | 4.01 | 5.56 | 11.07 | 17.8 | 18.4 |
| 2" | 4.27 | 7.14 | 12.09 | 19.0 | 19.2 |
| 2-1/2" | 5.61 | 7.65 | 15.29 | 23.6 | 28.9 |
| 3" | 5.99 | 8.84 | 16.64 | 25.9 | 30.5 |
General Note: all dimensions are in millimeter
Note: A: center-to-end of tee; H: outside diameter of band; G: minimum wall thickness; B: minimum length of perfect thread; L2: effective length of external thread.
Product Tags:
|
|
ASTM A403 WP304L Stainless Steel SPECIAL TEE Images
|
